Trunk Dimensions

Home » Comparisons » Trunk comparison: Peugeot 3008 vs VW ID.4

Trunk comparison: Peugeot 3008 vs VW ID.4

Comparison of trunk dimensions for the Peugeot 3008 and VW ID.4
Comparison of trunk dimensions for the Peugeot 3008 and VW ID.4

Key Differences (Summary)

The measured differences are overall small.

None of the values exceed 10% — the largest relative difference is exactly 10%: the trunk depth (loading edge to floor) is 0.4 in or 10% greater in the Peugeot 3008. Other relevant deviations: with the seats folded down, the trunk of the ID.4 is +0.8 in (+1%) longer, with the front seats upright the trunk of the Peugeot is +2 in (+5%) longer.

The trunk opening of the ID.4 is +0.8 in (+3%) higher and +2 in (+5%) wider in opening width. The loading edge of the Peugeot is +2.4 in (+8%) higher above the road. At the narrowest point, both are equally wide.

Impact on Usability

Since no difference exceeds 10%, the practical differences are small but noticeable in certain situations: For very long loads with folded seats, the ID.4 has a slight advantage (+0.8 in), for longer items with normal seat positions the Peugeot is better (+2 in).

The somewhat higher trunk opening and larger opening width of the ID.4 make loading tall or wide items easier; especially bulky parts can be maneuvered more easily through the opening in the ID.4.

The greater depth of the Peugeot (0.4 in / 10%) offers minimally more usable loading surface from floor to loading edge, which helps when stacking or placing flat luggage.

In contrast, the higher loading edge of the Peugeot (+2.4 in / 8%) makes lifting heavy loads into the trunk somewhat more strenuous than in the ID.4.

Conclusion: For everyday usability and frequent loading of wide or tall items, the ID.4 is slightly more practical.

Those who prefer a bit more usable length and a slightly deeper loading surface in the normal trunk (seats upright) have a small advantage with the Peugeot 3008. Overall, however, the differences are minor and rarely decisive alone when choosing the model.